399 SBF ENGINE

This engine is best suited for the NMRA HOT STREET class and the NMCA PRO STOCK class. The specs are as follows..
Block: Ford A351 9.120" deck siamese bore, 2.75 mains
Bore & Stroke: 4.140 X 3.7
crank:Scat billet lightweight
rods: MGP alum. 6.05", 1.88 rod journals
bearings: ACL Calico coated
large Roush roller cam bearings (4) 55mm, (1) 50mm
pistons: JE .200" dome, with Speed Pro .043/3mm rings, lateral gas ports
compression ratio: 15.8
Moroso alum. oil pan, #16 pickup for ext pump, pass side kickout
Jesel belt drive w/ MSD crank trigger
motor plate w/ attached Dailey Engineering oil pump and vacuum pump, CV remote filter mount and System 1 filter
Edel. 7721 style heads (7708 part #) ,2.200/1.6 CV titanium valves, CB seats, angle milled 1*, 38cc chamber, intakes flow 390cfm at .900", ex flow 275.
Jesel Mohawk rockers, 1.75" rocker bodies, 2.0 intake ratio, 1.8 ex
Manton 7/16-3/8" full taper .135" wall pushrods
Billet Fab valve covers with spring oilers and vac pop off set at 12.5"
Crower .904 roller lifters
Bullet 276/301 @.050", .505"/.460" lobe lift, 115 lobe sep, 112 intake centerline.
Edel Super Vic, serious portjob
Custom made headers & H-pipe that will fit if engine is going in a 79-04 Mustang with a UPR K-Member.
Engine is fresh. Engine made 852hp with a 4150 style BG demon carb. A cam change and carb change and this engine will make 900+hp with ease.
Over $35K invested.
Will sell for $10k.
Thank you for your intrest.

864-918-3321

This item is USED

Trades NOT ACCEPTED

Payment options:

COD

Item Location: GREER, SC Get Directions

This ad expired 7 days ago.