BBC 454 / 671 Blower- complete engine (Blown)

This blown GM generation V BBC 454 comes with a complete supercharger setup. It has a total of 505 miles on it and is barely broke in. The engine was completely setup for the blower and is designed to run on 93 octane pump fuel. This engine is complete from pan to scoop and has nothing but the best equipment installed on it. Why buy an engine that you still have to buy carbs, linkages, distributer, scoop, air cleaners, wires, pulleys, water pump, etc when you can buy this engine, connect the fuel line, put your radiator hoses on, add power to the distributer, and your alternator and you are ready to run. The engine is fully timed and tuned so for the most part it is just plug and play! Respective numbers should be a conservative 700 hp on 93 octane. It was very streetable and ran a cool 185 degrees with the high flow Meziere billet water pump.

Specs: GenV 7.4 liter 454, stock bore and stroke, stock Forged crank and rods,4 bolt mains, high performance bearings, 7.5 to 1 Speed pro pistons, ARP bolts, Flame proof file fit rings, melling high volume oil pump, Moroso 7 qt oil pan and pickup, double row timing set, Comp cam and lifter kit# 11-404-4, cam has been degreed, GM cast high performance 502 oval port heads, 2.19 intake and 1.88 exhaust valves, comp valve springs, fresh valve job, Pro form 1.7 ratio roller rockers, crane screw in rocker studs, ARP head bolts, Cometic head gaskets, heads have been sightly ported and polished, Weiand polished 671 street supercharger that is set up at 3% underdriven, Weiand polished oval port intake that has been drilled for a boost gauge, Weiand polishe pop off valve, Weiand aluminum blower studs, Weiand polished 2" carb riser plate, Weiand throttle linkage kit, Weiand polished top and bottom pulleys 34 and 35 tooth, Weiand 1807 drive belt, Summit polished 90 degree swivel thermostat housing with Milodon 180 degree thermostat, Braded steel fuel line kit with gauge, Double butterfly scoop with air cleaners and Edelbrock blower carbs.

I also have a brand new Turbo 400 that is built to handle 800 plus hp that I am selling seperately that will match up to this motor perfectly. In fact it was built specifically for this engine with all the best internals. It is a reverse pattern manuel shift with a brand new in the box torque converter and flywheel. This will be listed seperatel at $1350.00

Wow I am getting tired of all this typing, if you have any additional questions please call (713) 410-6715 anytime and ask for Al. Thanks for looking.

This item is USED

Trades NOT ACCEPTED

Payment options:

cash / wire transfer

Item Location: MADISONVILLE, LA Get Directions

Instructions for buyer:  Engine is located outside of the New Orleans area. I will be taking it to my friends shop for sale in Illinois for him to sell locally if it does not sell here.

This ad expired 50 days ago.