| AD CATEGORY :: Engines :: Engines & Components |
Ad #1620378 Posted:2009-10-02 09:37:48
This ad expired 1 days ago.
Chevy LS3 416ci 585HP Turn Key Engine
Camaro, Corvette, GTO, LS1, LS2, LS3, LS7

$12,999.00
Chevy LS3 416ci 585HP Turn Key
This engine makes serious horsepower and is still very driveable on the street. Making 560 ft lbs or torque it will burn the tires with the crack of the throttle
Peak Horsepower: 585 bhp @ 6500 rpm
Peak Torque: 560lb/ft @ 5200 rpm
Operating Range: 2500 - 6500 rpm
Compression Ratio: 11:1
Required Fuel: 91+ Octane Pump Gasoline
Base Price $12,999
Block: New GM LS3 aluminum block. Decked, bored 4.070”, honed with torque plates and pressure washed. New Durabond cam bearing installed, line honed, ARP main studs.
Crank: Callies 4340 forged steel, 4.000” stroke, internal balanced front and rear
Rods: Manley 4340 forged H-beam, 6.125” length, floating pin, ARP 2000 rod bolts.
Pistons: Manley 2618 forged with anti-friction coating
Rings: Mahle low drag plasma rings
Bearings: Clevite H-series main and rod bearings
Lifters: Comp Cams Hydraulic Roller
Pushrods: Comp Cams Magnum Series
Valve Spring Kit: Double polished springs, titanium retainers, hardened spring seats, hardened locks and Viton valve seals.
Rocker Arms: GM 1.7 ratio
Timing Set: Manley billet double roller, 9 key way bottom gear and Torrington bearing
Oil Delivery: Melling Select Performance
Gasket Set: Cometic MLS
Head Bolts: ARP Performance Hex Head
Covers: GM oil pan (to match your car), timing cover, rear seal housing, lifter valley housing and valve covers.
Intake System: GM L76 intake, 39lb injectors, fuel rails, Fast 92mm throttle body.
Damper: ATI Performance products
Camshaft:
Manufacturer:
Comp Cams
Type:
Hydraulic Roller
Operating Range:
2500-6700 RPM
Idle Quality:
Good
Duration:
Intake: 236˚@ .050”
Exhaust: 242˚@ .050”
Lift:
Intake: .600”
Exhaust: .600”
Lobe Separation:
112˚
Heads:
Type:
GM L92 Aluminum
Combustion Chamber:
62cc
Flow: 330CFM @ .600”
Intake Runner:
227 cc
Intake Valves:
Manley stainless steel 2.16”
Exhaust Valves:
Manley stainless steel 1.59”
This engine makes serious horsepower and is still very driveable on the street. Making 560 ft lbs or torque it will burn the tires with the crack of the throttle
Peak Horsepower: 585 bhp @ 6500 rpm
Peak Torque: 560lb/ft @ 5200 rpm
Operating Range: 2500 - 6500 rpm
Compression Ratio: 11:1
Required Fuel: 91+ Octane Pump Gasoline
Base Price $12,999
Block: New GM LS3 aluminum block. Decked, bored 4.070”, honed with torque plates and pressure washed. New Durabond cam bearing installed, line honed, ARP main studs.
Crank: Callies 4340 forged steel, 4.000” stroke, internal balanced front and rear
Rods: Manley 4340 forged H-beam, 6.125” length, floating pin, ARP 2000 rod bolts.
Pistons: Manley 2618 forged with anti-friction coating
Rings: Mahle low drag plasma rings
Bearings: Clevite H-series main and rod bearings
Lifters: Comp Cams Hydraulic Roller
Pushrods: Comp Cams Magnum Series
Valve Spring Kit: Double polished springs, titanium retainers, hardened spring seats, hardened locks and Viton valve seals.
Rocker Arms: GM 1.7 ratio
Timing Set: Manley billet double roller, 9 key way bottom gear and Torrington bearing
Oil Delivery: Melling Select Performance
Gasket Set: Cometic MLS
Head Bolts: ARP Performance Hex Head
Covers: GM oil pan (to match your car), timing cover, rear seal housing, lifter valley housing and valve covers.
Intake System: GM L76 intake, 39lb injectors, fuel rails, Fast 92mm throttle body.
Damper: ATI Performance products
Camshaft:
Manufacturer:
Comp Cams
Type:
Hydraulic Roller
Operating Range:
2500-6700 RPM
Idle Quality:
Good
Duration:
Intake: 236˚@ .050”
Exhaust: 242˚@ .050”
Lift:
Intake: .600”
Exhaust: .600”
Lobe Separation:
112˚
Heads:
Type:
GM L92 Aluminum
Combustion Chamber:
62cc
Flow: 330CFM @ .600”
Intake Runner:
227 cc
Intake Valves:
Manley stainless steel 2.16”
Exhaust Valves:
Manley stainless steel 1.59”
This item is NEW
Trades NOT ACCEPTED
Payment options:
![]() |
![]() |
Item Location: HUDSON, NH Get Directions To This City
Instructions for buyer: Buyer will pay shipping
Golen Engine Service
17 Dracut Rd
Hudson, NH 03051
1-(800) 591-9171 ext 2 or 1-(603) 886-3800 ext 2 Call Today
Ad posted by: GolenEngineService (#100920)
RaceSpace Profile: View
Member Since: 2005-11-14
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Phone Number: 1-(800) 591-9171 ext 2 or 1-(603) 886-3800 ext 2
Phone Number: 1-603-886-3800 ext 2

Your Recently Viewed Ads
- Ad #1699103: GREG WELD PROLITE SETS CHROME 15x3.5 & 8/
- Ad #1056588: 24' ALUMINUM STACKER REPO. Optima SAVE $
- Ad #1699156: rods and pistons
- Ad #1536570: Dominator drop bases 2 in drop 16 in dia
- Ad #1637245: 374" MAHLE Pistons 12.1 cr 3.480/3.5 str
- Ad #1660759: DOEMELT CHASSIS, BEST OF EVERYTHING
- Ad #1676357: SBF 302 351W FORD ALUMINUM CYLINDER HEADS
- Ad #1690347: 2005 32' Cargomate enclosed w/living quarters
- Ad #1701030: Dynamite Pavement Sprint Car Kit
- Ad #1605945: 2010 28ft RACE READY TRAILER $$ 4775.99$$

RESOURCE LINKS










