PROCOMP CHEVY SBC COMPLETE CYLINDER HEADS NEW

PROCOMP 190CC SBC STREET SERIES ALUMINUM CYLINDER HEADS (COMPLETE)

TO PURCHASE PLEASE CALL OUR ENGINE PARTS SPECIALISTS AT 1-585-216-1200 MON-FRI 8-5PM

FOR SMALL BLOCK CHEVROLET

PART#
PC-3002A (ANGLE PLUG)
PC-3002S (STRAIGHT PLUG)

SOLD AS A FULLY ASSEMBLED PAIR

THESE ARE 190CC INTAKE RUNNER WITH 64CC CHAMBERS

HIGH GRADE ALUMINUM, BRONZE VALVE GUIDES, HARDENED SEATS, ADVANCE PORT DESIGN FOR GREATER AIR FLOW, 3-ANGLE COMPETITION VALVE JOB.

Dual-Quench combustion chambers are more efficient for increased power and torque compaired to heart shaped chambers

THESE HEADS ARE ASSEMBLED WITH THE FOLLOWING COMPONENTS...

-COMP CAMS SUPER LOCK RETAINER
-4140 CHROME MOLY
-COMP CAMS STEEL SUPER LOCK VALVE LOCKS
-7* LOCK ANGLE - GREEN
-VALVE SPRINGS W/DAMPER - BLUE STRIP SPRINGS

INSTALLED @ 1.750 - WILL WORK WITH HYDRAULIC CAMS AND SMALL ROLLER CAMS

.550 NET VALVE LIFT

IF YOU ARE RUNNING A SOLID CAM OR ROLLER WE MUST USE A DIFFERENT SET OF SPRINGS AND POSSIBLY LONGER VALVES.

-PERFORMANCE VALVES Exh 1.60/Int 2.02

-Non-Magnetic Stem STAINLESS STEEL MATERIAL

-CHROME STEMS AND HARD TIPS

-SWIRL POLISHED AND FULLY MACHINED

-HARDENED 5/16 PUSHROD GUIDE PLATES

-COMES STANDARD WITH FLAT GUIDE PLATES

-ROCKER STUDS - Long Style for use with Poly-locks

-COMES STANDARD WITH MANLEY 3/8" STUDS

-MANLEY PERFORMANCE VITON STEEL JACKET VALVE STEM SEALS

BELOW IS OUR ASSEMBLY PROCESS...

* EVERY VALVE IN THE HEAD IS NUMBERED AND HAND LAPPED TO ENSURE THAT THE VALVE IS SEATED PROPERLY
* THE HEADS ARE WASHED IN INDUSTRIAL DETERGENT - MAKING SURE THAT ALL LOOSE METAL CHIPS, GREASE AND DIRT ARE CLEANED AND REMOVED
* VALVES SPRING INSTALLATION HEIGHT IS CHECK ON EVERY VALVE AND HARDENED SHIMS ARE USED TO +- .005
* WE THEN INSTALL THE VALVE TRAIN - WE USE ASSEMBLY OIL SO YOU DO NOT HAVE TO WORRY ABOUT A VALVE STICK UPON INITIAL START-UP
* GUIDE PLATES AND ROCKER STUDS ARE INSTALLED - WE USE ANTI-SEIZE AND THREAD SEALANT WERE NEEDED
* HEADS ARE INDIVIDUALLY BAGGED AND BOXED FOR SHIPMENT

These heads are 23 DEG, 190CC Runner with a 64CC Chamber. These heads have a Thick deck design so they can be used on Nitrous, Turbocharged and Supercharged applications.

Our heads work with most popular aftermarket intakes such as Edelbrock Performer, Performer RPM, Air-Gap and Victor Jr.

Dual Pattern Valve Covers will accept either Center Bolt or Perimeter bolt valve covers.

Dual Pattern Intake manifold to accept early or 87-95 intake manifold

Big Benefits for SBC motors such as 302, 327, 350, 383 & 400* Small Block Chevy Engines up to 1986. 64CC Combustion Chambers improve performance and retains stock compression on 1970 and earlier small-blocks.

TO PURCHASE PLEASE CALL OUR ENGINE PARTS SPECIALISTS AT 1-585-216-1200 MON-FRI 8-5PM

OUR WAREHOUSE IS LOCATED IN UPSTATE NY

BUYERS PAY ACTUAL UPS SHIPPING COSTS ON PARTS.

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: ONTARIO, NY Get Directions To This City

Instructions for buyer:  NO NEW YORK SALES PLEASE, BUYERS MUST CONTACT THEIR LOCAL F/A PRODUCTS AFFILIATE. FEEL FREE TO CALL US FOR A DIRECTORY.

TO PURCHASE PLEASE CALL OUR ENGINE PARTS SPECIALISTS AT 1-585-216-1200 MON-FRI 8-5PM

This ad expired 18 days ago.